9 Port FE Passive PoE Switch with 8 port POE
9 Port FE Passive PoE Switch with 8 port POE(PPS098) is released right now!!


  • Flexible power (DC: 12V, 24V or 48V)
  • 8 Passive POE Ports + 1 uplink port
  • Supporting10/100 Base-T applications
  • Auto MDI/MDIX crossover for all ports
  • Supporting duplex mode (Half/Full) auto-detection
  • Pin assignment: 4/5(+) & 7/8(-)


PPS098 is a 9 port FE passive PoE switch with 8 PoE ports and a 10/100Mbps uplink port. It is a flexible and economic solution to deploy and power diverse network devices via Ethernet UTP/STP cables, such as wireless access points, IP-based surveillance cameras, or IP phones in any places. By using different power adaptors (24V/48VDC), PPS098 can apply with powered devises in various voltages. PPS098 reserves space and simplifies the non-standard PoE deployment by saving power cords, power outlets and network patch cords.





9 x 10/100Base-TX RJ-45 Auto-MDI/MDI-X ports

PoE Ports


Power Adaptor

(Not included)

100~240V AC 50/60Hz

12V-48V DC, 5A Max.

Power Out

12V-48V DC, 800mA Max.

Power Consumption

5.6 Watts (Max. without any PD connected).

Pin Assignment

4/5(+), 7/8(-)

LED Indicators


Switch Architecture

Store and Forward

Switch Fabric


MAC Address

1K MAC address table with Auto learning function

Dimension (W x D x H)

197 x 110 x 25 mm

Operating environment

0~40 degree C, 10%~90%RH

Storage environment

-10 ~70 degree C, 5%~90% RH (non-condensing)


Warning: PoE ports must connect with PoE PD (Powered devices). Otherwise it may cause devices damage.


For more information and related products, please visit the website: